Markbass  Ninja, 121HR,  151P, Traveler 123, NYC804, 104HF, HR, Mini 121P:: For sale, UK, EU, On offer  Amps, :: Bass cabinets, Bassdirect, Warwick, Birmingham, Manchester, London Mark Bass Amplification

 


Amplifiers | Combos | >Cabs | Pedals | Accessories


Lightweight cabs designed in Italy

 

TRV102P                £439

New York 121 D2    £499

TRV151P 8Ω          £454

TRV151P 4Ω          £454

NY151 8Ω              £485

NYC121                 £445

Ninja 212               £635

Marcus 102HF     £575

Marcus 104HF     £825

Classic 104 Casa       £650


Please call to pay bank transfer or finance


FREE UK SHIPPING ON ALL MARKBASS CABS


Tel: 01926 886433


















 

Classic 104 Casa


  1. 1Michael League Signature Cabinet

  2. 2Equipped with: 4 x 10" Neodymium Markbass Custom and 1" Custom Tail compression driver on the side

  3. 3Rated power: 800 watts @ 8 ohms

  4. 4Frequency range: 50 - 20000 Hz

  5. 5Lightweight and compact design

  6. 6Closed housing

  7. 7Dimensions (W x H x D): approx. 57.6 x 60.9 x 47.2 cm

  8. 8Weight: about 21.40 kg





NYC 121 D2 - New for 2020

This new cabinet sounds deeper and warmer than the other 1x12" cabs thanks to its more generous dimensions, whilst remaining light and portable. Plus, it features a 1" voice coil tweeter in straight position with incredible clarity and definition.


New York 121 D2 is a great choice for 12" lovers that also like to have full sound and old-school vibes.


Highs are sweet and round, the upper mids have loads of presence, and the low mids have a warmth that sweeps evenly into a solid bottom end. Furthermore, its size perfectly stacks with our New York 151 cabinet allowing for new speaker configuration stack options.


> WARM, FULL TONE
Larger size of NEW YORK121 D2 gives a punchy, full and deep tone, as if the speaker was much bigger than 12".

> 1" VOICE COIL TWEETER / TWEETER LEVEL CONTROL
The 1" voice coil tweeter in straight position gives sweet and round highs, with incredible definition and clear tone and not at all harsh at higher volumes. As for other Markbass cabinets there's a tweeter level attenuator conveniently located on the side of NEW YORK121 D2. This allows you to control the tweeter output as you stand in front of the cabinet to listen to the sound.

> LIGHT WEIGHT
Weighing in at a mere 15.8 Kg this cabinet is another easy 'one man lift' – in fact it can be put in a bass bag on your back with all the leads in, amp head in one hand and pretty much the cabinet in the other.

> FITS PERFECTLY WHEN STACKED WITH NEW YORK 151
This cabinet stacks with the New York 151 cabinet, offering new speaker configuration stack options.

> PERFECT CHOICE FOR DOUBLERS
This exceptional cabinet is perfect with electric bass, but it's also ideal for double bass and acoustic bass since the sound of acoustic instruments is accurately reproduced by this amazing cabinet.





MarkBass Marcus Miller Standard 1021HR Bass Cab


This uber-versatile cabinet can handle up to 400 watts making it the ideal choice for a standalone cab, or an extension of your existing combo.

Thanks to the wedge shaped body, the Standard 121 HR can be stood upright on its end, or used as a wedge shaped monitor.

The warm and natural sound is tight and focused making the 121 HR ideal for acoustic and upright basses as well as electric.

The Standard 121 HR is a 1x12" rear tuned ported cabinet with a warm, focused and natural sound.

It’s a perfect choice for many stage situations as its wedge design allows to use it either as a floor monitor or on its side in standard position.

With its 400 watts of power handling it can be used as a standalone with a Markbass head or as extension cabinet for our top selling Mini CMD 121P combo, it’s a versatile and very portable solution (weights only 29.1lbs/13.2Kg) that covers all of your needs and also ideal for double bass and acoustic bass as sound the of acoustic instruments is faithfully reproduced by this amazing cabinet.

Specs

  1. 1Impedance: 8 ohms

  2. 2Speaker Size: 1x12 in.

  3. 3Bass Port: rear

  4. 4Tweeter: 1" voice coil tweeter

  5. 5Power Handling: 400W RMS (AES Standard)

  6. 6Crossover Frequency: 3.5 kHz

  7. 7Frequency Response: 43 Hz to 20 kHz

  8. 8Sensitivity: 100 dB SPL

  9. 9Weight: 29.1 lbs / 13.2 Kg

  10. 10Width: 17.72 in. / 45 cm

  11. 11Height: 17.72 in. / 45 cm

  12. 12Depth: 16.89 in. / 43 cm



MarkBass Marcus Miller Standard 102HF Bass Cab


The MarkBass Marcus Miller Standard 102HF Bass Cab is the perfect match to the MarkBass Little Marcus signature amp heads. The 2x10'' 102HF is a compact cab, loaded with custom neodymium drivers for a lightweight design with excellent punch and focus. The additional 1'' voice coil tweeter extends the cab's top-end response and is ideal for slap bass styles, melodic playing, or detailed chordal work. The 102HF features a wedge design, so can be used as a personal monitor or as a traditional vertical mount cab. The rear-ported design gives a full and controlled bottom-end, making stand-alone use a viable option for your gigs and rehearsals. Should you require more power and projection, the 102HF easily pairs with other cabinets and can create a rig to keep up with the loudest drummers and play the biggest venues. The MarkBass 102HF provides maximum tone with minimal weight and is perfect for busy gigging bassists.



Specifications

  1. Speaker Size: 2x10''

  2. Tweeter: 1'' Voice Coil

  3. Cab Power Handling (AES Standard): 400w - RMS

  4. Crossover Frequency: 3.5 Khz

  5. Frequency Response: 40hz to 20khz

  6. Sensitivity: 101 dB SPL

  7. Impedance: 8 Ohms

  8. Reflex/Cab Design: Rear/Wedge

  9. Dimensions: 23.38''/59.4cm | 18.93''/48.1cm | 20.39''/51.8cm

  10. Weight: 40.34lbs/18.3kg




Markbass top-artist and bass legend Alain Caron has partnered with Markbass to develop a cabinet that gives an extremely high-fidelity, real flat-response tone!


The TRAVELER 123 3-ways cab features a new Markbass custom 12" speaker with an astonishing 800W power handling, a special new 5" speaker and a new 1" compression driver, with a punchy bottom-end and incredible definition in the mids and highs!


Tech Spec’s for Traveller 123

IMPEDANCE :8 ohms

SPEAKER SIZE: 1x12" + 1x5" 

TWEETER: 1" coil compression tweeter

BASS PORT: rear

POWER HANDLING: 800W RMS (AES Standard)

CROSSOVER FREQUENCY: 1.5 kHz / 5.5 kHz

FREQUENCY RESPONSE: 40 Hz to 20 kHz

SENSITIVITY: 99 dB SPL

WEIGHT: 46.73 lbs / 21.2 Kg

WIDTH: 14.9 in. / 38 cm

DEPTH: 17.12 in. / 43.5 cm

HEIGHT: 23.22 in. / 59 cm




The Markbass Traveler 121 Ninja is a small and portable signature 1x12 for Richard Bona. Despite its size, the Traveler 121 Ninja can handle 800W of power, meaning you can pair it up with almost any head!


MARKBASS TRAVELER 121 NINJA SPECS

  1. IMPEDANCE: 8 ohms

  2. SPEAKER SIZE: 1x12 in.

  3. TWEETER: 1" compression driver with custom horn

  4. POWER HANDLING: 800W RMS (AES Standard)

  5. CROSSOVER FREQUENCY: 3.5 kHz

  6. FREQUENCY RESPONSE: 40 Hz to 20 kHz

  7. SENSITIVITY: 99 dB SPL

  8. WEIGHT: 45.19 lbs / 20.5kg

  9. WIDTH: 22.83 in. / 58 cm

  10. HEIGHT: 14.76 in. / 37.5 cm

  11. DEPTH: 16.73 in. / 42.5 cm




The Markbass New York 122 Ninja is Richard Bona's signature 2x12 cab. The Ninja cab doesn't sacrifice low end but remains tight and punchy. The custom Markbass speakers are remarkable clear and responsive, a 1.25" compression driver adds crystal clear highs and harmonics. The New York 122 Ninja has 800W power handling at 8ohms, making it the ideal partner for the Little Mark Ninja or Markbass Multiamp S.


MARKBASS NEW YORK 122 NINJA SPECS

  1. IMPEDANCE: 8 ohms

  2. SPEAKER SIZE: 2x12"

  3. TWEETER: 1.25" compression driver with custom horn

  4. POWER HANDLING: 800W RMS (AES Standard)

  5. CROSSOVER FREQUENCY: 3.5 kHz

  6. FREQUENCY RESPONSE: 45 Hz to 20 kHz

  7. SENSITIVITY: 103 dB SPL

  8. WEIGHT: 40.79 lbs / 18.5 kg

  9. WIDTH: 28.35 in. / 72 cm

  10. HEIGHT: 15.16 in. / 38.5 cm

  11. DEPTH: 14.37 in. / 36.5 cm



 

  1. Standard 104HR (rear ported)
  2. 800w, 4 x 10" + 1" horn

  3. Neodymium cab


IMPEDANCE - 8 or 4 ohms

SPEAKER SIZE - 4x10 in.

BASS PORT - rear

TWEETER - 1" compression driver with custom horn

POWER HANDLING - 800W RMS (AES Standard)

CROSSOVER FREQUENCY - 3.5 kHz

FREQUENCY RESPONSE - 35 Hz to 20 kHz

SENSITIVITY - 103 dB SPL

WEIGHT - 56 lbs / 25.4 kg

WIDTH - 23.4 in. / 59.4 cm

HEIGHT - 23.8 in. / 60.4 cm

DEPTH - 18.9 in. / 48 cm

 

This cabinet is available in both 8 ohm (STD104HR-8) and 4 ohm (STD104HR-4) versions.




  1. Standard 104HF (front ported)
  2. 800w, 4 x 10" + 1" horn

  3. Neodymium cab

IMPEDANCE  8 or 4 ohms

SPEAKER SIZE  4x10 in.

BASS PORTS front

TWEETER 1" compression driver with custom horn

POWER HANDLING  800W RMS (AES Standard)

CROSSOVER FREQUENCY  3.5 kHz

FREQUENCY RESPONSE  35 Hz to 20 kHz

SENSITIVITY  103 dB SPL

WEIGHT  65.92 lbs / 29.9 kg

WIDTH  23.39 in. / 59.4 cm

HEIGHT  29.13 in. / 73.9 cm

DEPTH  18.9 in. / 48 cm


This cabinet is available in both 8 ohm (STD104HF-8) and 4 ohm (STD104HF-4) versions.



 


  1. Standard 102HF (front ported)
  2. 400w, 2 x10" + 1" Horn

  3. Neodymium cab

IMPEDANCE - 8 or 4 ohms

SPEAKER SIZE - 2x10 in.

BASS PORTS - front

TWEETER - 1" compression driver with custom horn

POWER HANDLING - 400W RMS (AES Standard)

CROSSOVER FREQUENCY - 3.5 kHz

FREQUENCY RESPONSE - 40 Hz to 20 kHz

SENSITIVITY - 101 dB SPL

WEIGHT - 49.8 lbs / 22.6 kg

WIDTH - 23.4 in. / 59.4 cm

HEIGHT - 21.6 in. / 55 cm

DEPTH - 18.9 in. / 48 cm

 

All Markbass cabinets contain ultra-light neodymium speakers. This cabinet is available in both 8 ohm (STD102HF-8) and 4 ohm (STD102HF-4) versions.


 

  1. Traveller 121H
  2. 400w, 1 x 12" + 1" Horn

  3. Neodymium cab

IMPEDANCE  8 ohms

SPEAKER SIZE  1x12 in.

BASS PORT  rear

TWEETER  1" compression driver with custom horn

POWER HANDLING  400W RMS (AES Standard)

CROSSOVER FREQUENCY  3.5 kHz

FREQUENCY RESPONSE  40 Hz to 20 kHz

SENSITIVITY  99 dB SPL

WEIGHT  34.61 lbs / 15.7 kg

HEIGHT  15.35 in. / 39 cm

WIDTH  23.39 in. / 59.4 cm

DEPTH  17.05 in. / 43.3 cm

 

This cabinet was redesigned in spring 2007 to stack with Standard series cabinets. On its "side" it also stacks with the Mini CMD 121P and CMD 121H combos.




Markbass New York NY151 Cab

A compact, light bass amplifier extension cabinet that's ideal for extending a small combo or using with a head up to 500w. 15" speaker, 8 Ohms.

Here's what Markbass say about the NY151

The latest addition to the New York cabinet series, this little powerhouse is the perfect extension for either the Mini CMD 151P combo, or the CMD 151P Jeff Berlin combo. It's also a great lightweight cabinet option to combine with any 500W Markbass amp.

Features

  1. IMPEDANCE: 8 ohms

  2. SPEAKER SIZE: 1x15"

  3. BASS PORT: rear

  4. TWEETER: piezo

  5. POWER HANDLING: 400W RMS (AES Standard)

  6. CROSSOVER FREQUENCY: 3.5 kHz

  7. FREQUENCY RESPONSE: 40 Hz to 18 kHz

  8. SENSITIVITY: 100 dB SPL

  9. WEIGHT: 37.3 lbs / 16.9 kg

  10. WIDTH: 18.3" / 46.4 cm

  11. HEIGHT: 18.3" / 46.4 cm

  12. DEPTH: 18.9 in. / 48 cm

Notes

Stacks perfectly under the Mini CMD 151P and CMD 151P Jeff Berlin combos.




MarkBass Traveler 102P 8 Ohm Bass Speaker Cabinet  - Information

MarkBass Traveler 102P bass speaker cab delivers probably the smallest and lightest 2x10 cabinet that you'll ever come across. MarkBass Traveler 102P 8 Ohm bass cabs weigh in at only 15 kilos making this is an extremely easy cab to carry up those back stage stairs. Don't be put off by the size of the Traveler 102P 8 Ohm cab, thanks to the ultra-light neodymium speakers the Traveller 102P really whacks it out and you could also add the Traveler 151P for a punchy full-range sound.

  1. IMPEDANCE: 8 ohms

  2. SPEAKER SIZE: 2x10 inch Ultra-light Neodymium speakers.

  3. BASS PORT: Rear

  4. TWEETER: Piezo

  5. POWER HANDLING: 400W RMS (AES Standard)

  6. CROSSOVER FREQUENCY: 3.5 kHz

  7. FREQUENCY RESPONSE: 45 Hz to 18 kHz

  8. SENSITIVITY: 101 dB SPL

  9. WEIGHT: 33 lbs / 15 kg

  10. WIDTH: 23.4 in. / 59.4 cm

  11. HEIGHT: 13 in. / 33 cm

  12. DEPTH: 17 in. / 43.3 cm 



MarkBass Traveler 151P Bass Speaker Cabinet


MarkBass Traveler 151P bass speaker cab delivers probably the smallest and lightest 1x15 bass cabinet that you'll ever come across. MarkBass Traveler 151P bass cabs weigh in at under 17 kilos, which makes this is an easy cab to carry up those back stage stairs. Don't be put off by the size of the Traveller 151-P cab, thanks to the ultra-light neodymium speaker the Traveler 151P really thumps it out.

MarkBass Traveler 151P Bass Speaker Cabinets are perfect for club gigs, especially if you use in pairs.





  1. IMPEDANCE: 8 ohms

  2. SPEAKER SIZE: 1x15 inch Ultra-light Neodymium speaker

  3. BASS PORT: Rear

  4. TWEETER: Piezo

  5. POWER HANDLING: 400W RMS (AES Standard)

  6. CROSSOVER FREQUENCY: 3.5 kHz

  7. FREQUENCY RESPONSE: 40 Hz to 18 kHz

  8. SENSITIVITY: 100 dB SPL

  9. WEIGHT: 37.3 lbs / 16.9 kg

  10. WIDTH: 23.39 in. / 59.4 cm

  11. HEIGHT: 13 in. / 33 cm

  12. DEPTH: 17.05 in. / 43.3 cm





New York NYC804


NYC804

The Markbass New York 804 features four 8 custom B&C neodymium speakers, designed specially for this cabinet, bringing it closer in sound to larger 4x10 cabinets, but in a much more compact enclosure.


  1. Power: 800 watts

  2. Loudspeaker: Neodymium

  3. Loudspeaker Type: Neodymium

  4. Impedance: 8 ohms

  5. SPL ( 1w/1m): 101dB

  6. Frequency Response: 45 - 20kHz

  7. Enclosure: Plywood

  8. Connections: ¼" Jack & Speakon

  9. Dimensions: 40 cm x 40 cm x 40 cm


Mini NY 121



Markbass NY 121

Now Mark Bass' most popular combo, the Mini CMD 121P, has found its perfect companion! This is their lightest (29 lbs!) and most compact cabinet ever, and serves as a great extension cabinet for their combos: with this cab added, your combo turns into a 500W rig! This is also a small but mighty match for any of our 250-500W heads.

Mark Bass NY 121 Features

  1. 1IMPEDANCE : 8 ohms

  2. 2SPEAKER SIZE : 1x12 in.

  3. 3BASS PORT : rear

  4. 4TWEETER : piezo

  5. 5POWER HANDLING : 400W RMS (AES Standard)

  6. 6CROSSOVER FREQUENCY : 3.5 kHz

  7. 7FREQUENCY RESPONSE : 45 Hz to 18 kHz

  8. 8SENSITIVITY : 100 dB SPL

  9. 9WEIGHT : 29.3 lbs / 13.3 kg

  10. 10WIDTH : 15.3 in. / 38.3 cm

  11. 11HEIGHT : 17 in. / 43.2 cm

  12. 12DEPTH : 14.1 in. / 35.8 cm

  13. 13Stacks perfectly under the Mini CMD 121P and CMD 121H combos.